LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra5 LS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L (Diesel) >> Diagnostic Information and Procedures >> Ignition Relay Diagnosis >> Circuit/System Verification

Circuit/System Verification

  1. Cycle the ignition from OFF to ON. You should hear and feel an audible click from the EC ignition relay. Repeat as necessary in order to verify EC ignition relay operation.
  2. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals