LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra5 LS, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Engine Electrical >> Repair Instructions >> Battery Tray Replacement (Diesel Engine) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Battery Hold Down Bar, Bracket And Nuts
    GM1962544Courtesy of GENERAL MOTORS CORP.
  1. Remove the battery from the battery tray. Refer to Battery Replacement .
    2. Fig 2: View Of Fuel Filter Assembly
    GM1962545Courtesy of GENERAL MOTORS CORP.
  2. Remove the fuel filter assembly. Refer to Fuel Filter Replacement .
    3. Fig 3: View Of Engine Fuse Block And Screws
    GM1962546Courtesy of GENERAL MOTORS CORP.
  3. Remove the engine fuse block.
    4. Fig 4: Identifying ECM
    GM1962547Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine control module (ECM). Refer to Engine Control Module Replacement .
  5. Check the battery tray for obvious cracks or damage.
    6. Fig 5: Identifying Glow Plug Fuse Box
    GM1962548Courtesy of GENERAL MOTORS CORP.
  6. Remove the glow plug fuse box.
  7. Remove the glow plug control unit.
    8. Fig 6: View Of Upper Battery Tray Bolts
    GM1962549Courtesy of GENERAL MOTORS CORP.
  8. Remove the battery tray upper bolts.
    9. Fig 7: Identifying Battery Tray Retaining Bolts
    GM1962551Courtesy of GENERAL MOTORS CORP.
  9. Remove the battery tray retaining bolts.
  10. Remove the battery tray.
scientia non olet · About LEMON Manuals