Wiring Systems And Power Management - Circuit Testing Procedures (2 Of 2)

• Testing for Continuity
  • Notes
  • With a DMM
  • With a Test Lamp
• Testing for Short to Ground
  • Notes
  • With a DMM
  • With a Test Lamp
  • Fuse Powering Several Loads
• Testing for a Short to Voltage
• Testing for Intermittent Conditions and Poor Connections
  • Tools Required
  • Testing for Proper Terminal Contact
    • Notes
    • Testing for Proper Terminal Contact in Bussed Electrical Centers (BEC)
      • Notes
      • Flat Wire (Dock and Lock) Connectors
  • Control Module/Component Voltage and Grounds
  • Temperature Sensitivity
  • Electromagnetic Interference (EMI) and Electrical Noise
  • Incorrect Control Module
• Inducing Intermittent Fault Conditions
  • Tools Required
  • Salt Water Spray
  • High Temperature Conditions
  • Low Temperature Conditions
  • Duplicating Failure Conditions