Installation Procedure

NOTE: Refer to Fastener Notice .

Fig 1: Identifying Antenna Module And Screws

Courtesy of GENERAL MOTORS CORP.

Install the antenna module with the screws (1).
Tighten: Tighten the antenna module screws to 2 N.m (18 lb in) .
Connect the antenna module electrical connector.
Install the headliner. Refer to Headlining Trim Panel Replacement .
Install the sun visors. Refer to Sunshade Replacement .
Install the windshield garnish moulding. Refer to Windshield Pillar Garnish Molding Replacement .
Connect the negative battery cable.