LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L (Diesel) >> Repair Instructions >> Turbocharger Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Engine Cover And Fasteners
    GM1962428Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Remove engine cover. Refer to Engine Cover Replacement .
    3. Fig 2: View Of Boost Pressure Sensor And Connector
    GM1820588Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the boost pressure sensor connector.
  4. Remove the engine wiring harness cover upward.
  5. Remove the boost pressure sensor.
scientia non olet · About LEMON Manuals