LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L (Diesel) >> Repair Instructions >> Exhaust Temperature Sensor Replacement - Position 1 >> Removal Procedure

Removal Procedure

    Fig 1: Locating Exhaust Gas Temperature Sensor Connector
    GM1820485Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution .
  1. Disconnect the negative battery cable.
  2. Disconnect the exhaust gas temperature (EGT) sensor 1 connector.
  3. Remove the EGT sensor 1 from the front exhaust pipe.