LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L (Diesel) >> Diagnostic Information and Procedures >> DTC P2533 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, observe the scan tool ignition 1 data parameter. The reading should indicate the circuit is active.
  2. Observe the DTC information with a scan tool. DTC P2533 should not set.
  3. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
scientia non olet · About LEMON Manuals