LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LS, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Front Wheel Speed Sensor Jumper Harness Replacement >> Installation Procedure

Installation Procedure

  1. Install the front wheel speed sensor jumper harness.
    2. Fig 1: View Of Front Wheel Speed Sensor Electrical Connector In Clamps
    GM1290262Courtesy of GENERAL MOTORS CORP.
  2. Connect the front wheel speed sensor electrical connector and secure it into the clamps.
  3. Replace the jumper harness into the wiring harness.
  4. Insert the terminals into connector as they had been removed:
    • Right-side-terminals 4, WH, and 5, GY
    • Left-side-terminals 6, BN, and 7, L-BU
    5. Fig 2: View Of EBCM Connector
    GM1290102Courtesy of GENERAL MOTORS CORP.
  5. Connect EBCM connector.
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals