LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LS, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers And Washers >> Repair Instructions >> Windshield Wiper Motor Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
    Fig 1: View Of Wiper Motor Bolts
    GM1308529Courtesy of GENERAL MOTORS CORP.
  1. Install the wiper motor with the bolts.

    Tighten:  Tighten the wiper motor bolts to 8 N.m (71 lb in)  .

  2. Connect the electrical connector.
  3. Press the wiper arm linkage onto the motor driveshaft.
    4. Fig 2: Identifying Wiper Arm Linkage Bolts
    GM1308528Courtesy of GENERAL MOTORS CORP.
  4. Install the wiper arm linkage to the motor driveshaft with the washer and the nut.

    Tighten:  Tighten the wiper arm linkage nut to 5 N.m (44 lb in)  .

  5. Install the left side portion of the cowl vent grille. Refer to Air Inlet Grille Panel Replacement .
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals