LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Optra LS, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 1.6L >> Diagnostic Information and Procedures >> DTC P0510 >> Circuit Description

Circuit Description

The throttle body assembly contains an idle speed control (ISC) motor that is used to control the engine speed at idle. The engine control module (ECM) commands the ISC motor to adjust the throttle angle for idle speed control. An idle switch is also integrated into the throttle body assembly. The idle switch position is dependent upon the position of the throttle. The ECM receives an ON signal from the idle switch when the throttle is at idle and receives an OFF signal from the switch when the throttle is open.

The following table illustrates the correlation between the idle switch and the throttle position:

Throttle Position Idle Switch Idle Switch Parameter
Closed Open ON
Open Closed OFF
scientia non olet · About LEMON Manuals