LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 301 (Engine Exhaust System) >> Repair Instructions >> Converter Hanger Assembly Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Chevrolet Monte Carlo and 2006 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Catalytic Converter Hangers
    GM1553064Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Using a suitable jack, support the exhaust system, if necessary.
  3. Remove and discard the catalytic converter pipe hangers (1), if necessary.
scientia non olet · About LEMON Manuals