Installation Procedure

Fig 1: Adjusting Front Camber

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the strut to the vehicle. Refer to Strut, Strut Component, and Spring Replacement .
Tighten: Tighten the strut-to-knuckle nuts as far as to allow movement of the knuckle.
Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation .
Adjust the camber (1).
Tighten: Tighten the strut-to-knuckle nuts to 130 N.m (96 lb ft).
Lower the vehicle.