LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Impala LTZ >> Repair and Diagnosis >> Brakes >> Anti-Lock Brake System And Traction Control System >> Repair Instructions >> Vehicle Yaw Sensor with Vehicle Lateral Accelerometer Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Yaw Rate Sensor/Lateral Accelerometer & Mounting Nuts
    GM899225Courtesy of GENERAL MOTORS CORP.
  1. Install the yaw rate sensor/lateral accelerometer (1).
    2. NOTE: Refer to Fastener Notice .
  2. Install the 2 yaw rate sensor/lateral accelerometer nuts (2).

    Tighten:  Tighten the nuts to 6 N.m (53 lb in).

    3. Fig 2: View Of Yaw Rate Sensor/Lateral Accelerometer & Electrical Connector
    GM899221Courtesy of GENERAL MOTORS CORP.
  3. Connect the yaw rate sensor/lateral accelerometer electrical connector (2).
  4. Install the front floor center console. Refer to Front Floor Console Replacement (Impala) .
  5. Program the new yaw rate/lateral accelerometer. Refer to Control Module References .
  6. Perform the Diagnostic System Check - Vehicle .
scientia non olet · About LEMON Manuals