LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Equinox LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Door System, Mirror System & Window System) >> Repair Instructions >> Window Weatherstrip Run Channel Assembly Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Front Window Weatherstrip Run Channel Assembly
    GM1378601Courtesy of GENERAL MOTORS CORP.
  1. Install the window weatherstrip run channel assembly.
    1. Starting at the lower rear corner of the window opening, press the weatherstrip run channel onto the door flange.
    2. Ensure the channel is fully secured into the upper corners of the door frame.
  2. Install the inner belt seal. Refer to Sealing Strip Replacement - Front Door Window Belt Inner .
  3. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door .
scientia non olet · About LEMON Manuals