Installation Procedure
WARNING: This page is about a different car, the 2006 Pontiac Torrent and 2006 Chevrolet Equinox. However, it is still accessible from the selected car via links, so may be relevant.
- Position the switch assembly.
- Install the screws to the switch assembly.
Tighten: Tighten the screws to 2.5 N.m (22 lb in).
- Install the console shift lever bezel. Refer to Trim Bezel Replacement - Center in Instrument Panel, Gages, and Console.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.