LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission - TREMEC 6-Speed >> Repair Instructions - On Vehicle >> Transmission Control Boot Replacement >> Removal Procedure

Removal Procedure

  1. Remove the shift control knob. Refer to Transmission Control Lever Knob Replacement .
    2. Fig 1: Sides Of Shift Control Boot To I/P Accessory Trim Plate
    GM180587Courtesy of GENERAL MOTORS CORP.
  2. Grasp the sides of the shift control boot and apply light pressure in toward the shift control lever to begin to release the shift boot retaining tabs from the instrument panel (I/P) accessory trim plate.
  3. Using light pressure, continue to release the remaining boot retaining tabs.
    4. Fig 2: Shift Control Boot To Shift Control Lever
    GM71519Courtesy of GENERAL MOTORS CORP.
  4. Lift the boot away from the trim plate and remove the boot.
scientia non olet · About LEMON Manuals