LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Transmission >> Manual Transmission - TREMEC 6-Speed >> Repair Instructions - On Vehicle >> Transmission Control Boot Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Shift Control Boot To Shift Control Lever
    GM71519Courtesy of GENERAL MOTORS CORP.
  1. Install the shift control boot over the shift control lever.
    2. Fig 2: Shift Control Boot To I/P Accessory Trim Plate
    GM180589Courtesy of GENERAL MOTORS CORP.
  2. Align the shift control boot to the I/P accessory trim plate opening, then press to lock the boot retaining tabs.
  3. Adjust the shape of the boot for appearance, if necessary.
  4. Install the shift control knob. Refer to Transmission Control Lever Knob Replacement .
scientia non olet · About LEMON Manuals