LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Pulley Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Power Steering Pump Pulley Remover
    GM649303Courtesy of GENERAL MOTORS CORP.
  1. Remove the brake pressure modulator valve (BPMV). Refer to Brake Pressure Modulator Valve Replacement .
  2. Remove the BPMV bracket. Refer to Brake Pressure Modulator Valve Bracket Replacement .
  3. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory .
  4. Install the J 25034-C  on the power steering pump pulley and remove the pulley.
scientia non olet · About LEMON Manuals