LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Replacement (L61) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Generator Electrical Connectors
    GM1578426Courtesy of GENERAL MOTORS CORP.
  1. Disconnect negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the air cleaner resonator. Refer to Air Cleaner Outlet Resonator Replacement .
  3. Remove the drive belt. Refer to Drive Belt Replacement .
  4. Remove the radiator inlet hose. Refer to Radiator Inlet Hose Replacement (LZ4, LZ9) or Radiator Inlet Hose Replacement (L61) .
  5. Disconnect the engine wiring harness electrical connector (1) from the generator.
  6. Reposition the engine wiring harness lead rubber boot (3).
  7. Remove the engine wiring harness terminal lead to generator nut (3).
  8. Remove the engine wiring harness terminal (4) from the generator stud.
    9. Fig 2: View Of Generator & Bolts
    GM1578425Courtesy of GENERAL MOTORS CORP.
  9. Remove the generator bolts.
  10. Remove the generator.
scientia non olet · About LEMON Manuals