LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Instrument Panel Trim And Console Trim) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different car, the 2008 Chevrolet Malibu Classic. However, it is still accessible from the selected car via links, so may be relevant.
Application Specification
Metric English
Center Support Bracket Floor Bolt 10 N.m 89 lb in
Console Armrest Screw 1 N.m 10 lb in
Console Bracket Reinforcement Screw 1 N.m 10 lb in
Console Bracket Screw 1 N.m 10 lb in
Console Rear Cup Holder Screw 1 N.m 10 lb in
Crush Bracket to Front of Dash Nut 10 N.m 89 lb in
Front Console Screw 1 N.m 10 lb in
HVAC Module to Front of Dash Bolt 4 N.m 35 lb in
I/P Center Support Bracket Bolt 10 N.m 89 lb in
I/P Cluster Trim Plate Bezel Screw 1.5 N.m 13 lb in
I/P Compartment Assembly Screw 2.5 N.m 22 lb in
I/P Compartment Latch Screw 2.5 N.m 22 lb in
I/P to Body Mounting Bolt 26 N.m 19 lb in
I/P Trim Pad Screw 2.5 N.m 22 lb in
I/P Wire Harness Ground Nut 10 N.m 89 lb in
Ignition Switch Bracket Screw 5 N.m 44 lb in
Ignition Switch Screw 2.5 N.m 22 lb in
Inflatable Restraint I/P Module Bolt 10 N.m 89 lb in
Knee Bolster Bracket Nut 10 N.m 89 lb in
Knee Bolster Screw 2.5 N.m 22 lb in
Rear Console Bolt 1 N.m 10 lb in
scientia non olet · About LEMON Manuals