LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Corvette Base, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC B1325 >> Circuit/System Verification

Circuit/System Verification

  1. Engine running measure and record the voltage at the battery terminals. Verify that the battery voltage is 12.5-15.5 volts.
  2. Engine running, observe the scan tool BCM Battery Positive Voltage parameter. Verify that the scan tool displays a value that is within 2 volts of the battery voltage recorded in step 1.
    • If the scan tool parameter is not within the specified range, go to Circuit/System Testing.
  3. Go to Diagnostic Aids .
scientia non olet · About LEMON Manuals