LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Corvette Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Steering Wheel Position Sensor Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Refer to SIR Caution .
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the steering column from the vehicle. Refer to Steering Column Replacement .
    3. Fig 1: Steering Shaft Seal, Sensor Retainer, Sensor Assembly, Lower Spring Retainer, Adapter & Bearing Assembly (Telescoping)
    GM678048Courtesy of GENERAL MOTORS CORP.
  3. Remove the steering shaft seal (5).
  4. Remove the sensor retainer (4).
    5. IMPORTANT: If reusing the sensor, it may have to be centered before removal. Refer to Steering Wheel Position Sensor Centering .
  5. Remove the sensor assembly (3).
  6. Remove the lower spring retainer (2).
  7. Remove the adapter and bearing assembly (1).
scientia non olet · About LEMON Manuals