Removal Procedure
CAUTION:
Refer to Battery Disconnect Caution
.
- Remove the upper fan shroud. Refer to Engine Coolant Fan Upper Shroud Replacement (4.3L, 4.8L, 5.3L, 6.0L, 6.2L, 7.0L) or Engine Coolant Fan Upper Shroud Replacement (6.6L) .
- Remove the drive belt. Refer to Drive Belt Replacement .
- Remove the generator bolts (1).
- Remove the generator front support bracket attached to generator bracket and generator.
- Position the generator to access wiring.
- Remove the positive battery cable from the generator, perform the following:
- Slide the boot down to access the terminal stud.
- Remove the positive cable nut.
- Remove the positive cable.
- Disconnect the generator electrical connector.
- Remove the generator (2).