LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2008 >> Chevy Express G2500, Van Passenger >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Bracket Replacement (6.6L) >> Removal Procedure

Removal Procedure

CAUTION: Refer to Battery Disconnect Caution .
  1. Remove the cooling fan. Refer to Fan Replacement .
  2. Remove the drive belt. Refer to Drive Belt Replacement .
  3. Disconnect the generator electrical connector.
    4. Fig 1: Identifying Auxiliary Generator & Bolts
    GM1369547Courtesy of GENERAL MOTORS CORP.
  4. Remove the generator bolts (1).
  5. Remove the generator (2).
  6. Remove the positive battery cable from the generator, perform the following:
    1. Slide the boot down to access the terminal stud.
    2. Remove the positive cable nut.
    3. Remove the positive cable.
  7. Disconnect the RH engine wiring main harness connector.
    8. Fig 2: Identifying RH Engine Wiring Harness Bracket Bolts
    GM1732754Courtesy of GENERAL MOTORS CORP.
  8. Remove the 2 RH engine wiring harness bracket bolts and position aside.
    9. Fig 3: Identifying Wiring Harness Routing Bolts
    GM1732762Courtesy of GENERAL MOTORS CORP.
  9. Remove the 2 wiring harness routing bolts.
    10. Fig 4: View Of Oil Indicator Tube Bracket Bolt
    GM1732765Courtesy of GENERAL MOTORS CORP.
  10. Remove the oil indicator tube bracket bolt.
    11. Fig 5: View Of Drive Belt Tensioner
    GM1334909Courtesy of GENERAL MOTORS CORP.
  11. Remove the drive belt tensioner bolt and tensioner.
    12. Fig 6: View Of Generator Mounting Bracket
    GM1334912Courtesy of GENERAL MOTORS CORP.
  12. Remove the bolts and nut and the generator mounting bracket.
  13. Transfer any parts as needed.
scientia non olet · About LEMON Manuals