Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Install the front door window (1) to the door from the outside of the vehicle.
- Install the front run channel to the door. Refer to Front Side Door Window Channel Replacement .
- Install the nuts (2) in order to retain the front door window (1) to the sash and tighten to 11 N.m (97 lb in).
- Install the inner window sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .
- Install the outer window sealing strip. Refer to Outer Belt Sealing Strip Replacement .
- Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
- Install the front door rear garnish. Refer to Front Side Door Rear Garnish Molding Replacement .
- Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
NOTE:
Before raising or lowering the front door window (1), ensure that the front door window (1) is properly aligned in the rear run channel.
CAUTION:
Refer to Fastener Caution
.