Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 GMC Savana Special, 2009 GMC Savana Camper Special, 2009 GMC Savana, 2009 Chevrolet RV Cutaway, and 2009 Chevrolet Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
- Remove the front door rear garnish. Refer to Front Side Door Rear Garnish Molding Replacement .
- Remove the front door water deflector. Refer to Front Side Door Water Deflector Replacement .
- Lower the front door window.
- Remove the inner window sealing strip. Refer to Front Side Door Window Belt Inner Sealing Strip Replacement .
- Remove the outer window sealing strip. Refer to Outer Belt Sealing Strip Replacement .
- Remove the bolt (2) that retains the front run channel (1) to the door.
- Remove the front run channel (1) from the door.
- Raise the front window approximately half way in order to access the nuts that retain the front door window to the sash. Access the nuts through the holes in the front door module.
- Remove the nuts that retain the front door window to the sash.
- Remove the front door window from the door from the outside of the vehicle.
- Remove the bolt (2) that retains the rear run channel (1) to the door.
- Remove the rear run channel (1) from the door.