Speaker Replacement - Front Upper (Impala)

WARNING: This page is about a different car, the 2007 Chevrolet Monte Carlo and 2007 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing/Installing Front Upper Speaker

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedure Remove the instrument panel (I/P) outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side or Instrument Panel Outer Trim Cover Replacement - Left Side . Remove the windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement (Impala) or Windshield Pillar Garnish Molding Replacement (Monte Carlo) .
1	Radio Windshield Side Garnish Molding Speaker Assembly Tip: Release the tabs on the windshield pillar speaker carrier to remove the speaker from the molding.

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

Remove the instrument panel (I/P) outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side or Instrument Panel Outer Trim Cover Replacement - Left Side .
Remove the windshield pillar garnish molding. Refer to Windshield Pillar Garnish Molding Replacement (Impala) or Windshield Pillar Garnish Molding Replacement (Monte Carlo) .

Radio Windshield Side Garnish Molding Speaker Assembly
Tip: Release the tabs on the windshield pillar speaker carrier to remove the speaker from the molding.