LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Uplander Base, 3.9 W >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular System, Entertainment System, And Navigation System >> Repair Instructions >> Digital Radio Antenna Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Antenna Base Cable Connectors
    GM859160Courtesy of GENERAL MOTORS CORP.
  1. Remove the right windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
  2. Partially remove the upper portion of the right front door opening weatherstrip. Refer to Front Door Opening Weatherstrip Replacement .
  3. Remove the right sunshade. Refer to Sunshade Replacement .
  4. Partially lower the right front corner of the headliner.
  5. Disconnect the antenna cables from the antenna base cable connectors.
    6. Fig 2: Identifying Antenna Base Bolt
    GM1132311Courtesy of GENERAL MOTORS CORP.
  6. Remove the antenna base bolt.
    7. Fig 3: Antenna Base & Cable Connectors
    GM878369Courtesy of GENERAL MOTORS CORP.
  7. Disengage the retainers at the inside of the roof.
    8. Fig 4: View Of Antenna Base Assembly
    GM956421Courtesy of GENERAL MOTORS CORP.
  8. Remove the antenna base assembly.
scientia non olet · About LEMON Manuals