LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Uplander Base, 3.9 1 >> Repair and Diagnosis >> Brakes >> Antilock Brake System, Traction Control System & Stability Control System >> Repair Instructions >> Yaw Rate Sensor/Lateral Accelerometer Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Locating Yaw Rate Sensor/Lateral Accelerometer
    GM1538732Courtesy of GENERAL MOTORS CORP.
  1. Install the yaw rate sensor (1) to the console bracket.
    2. NOTE: Refer to Fastener Notice .
  2. Install the nuts (2) retaining the yaw rate sensor.

    Tighten:  Tighten the nuts to 9 N.m (80 lb in).

  3. Connect the electrical connector (3) to the yaw rate sensor.
  4. Install the front floor console bracket assembly. Refer to Front Floor Console Bracket Assembly Replacement .
scientia non olet · About LEMON Manuals