LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Uplander Base, 3.9 1 >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed & MOVEABLE Window Systems >> Repair Instructions >> Rear Quarter Window Weatherstrip Replacement >> Installation Procedure

Installation Procedure

    IMPORTANT: The rear quarter window weatherstrip service replacement part is a cut-to-fit part. The weatherstrip must be trimmed to fit the window opening and joined together.
    Fig 1: View Of Swing Out Window Weatherstrip
    GM1480113Courtesy of GENERAL MOTORS CORP.
  1. Install the rear quarter window weatherstrip forward joint to the vehicle.
  2. Align the rear quarter window weatherstrip forward joint (2) to 50 mm (1.96 in) from the front lower window opening radius.
  3. Roll the rear quarter window weatherstrip from the joint forward around the entire periphery of the window opening flange.
  4. Install the rear quarter window. Refer to Quarter Window Replacement (Without A20 Manual)  or Quarter Window Replacement (With A20 Power) .
scientia non olet · About LEMON Manuals