Installation Procedure

Fig 1: View of Starter Heat Shield, Bolts, & Nuts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

If equipped with a 8.1L engine, install the starter heat shield.
Install the starter heat shield bolts, and nut.
Tighten:
- Tighten the bolts to 3 N.m (35 lb in).
- Tighten the nut to 5 N.m (44 lb in).

Fig 2: View Of Starter & Heat Shield

Courtesy of GENERAL MOTORS CORP.

If equipped with a 4.8L, 5.3L, or 6.0L engine, install the starter heat shield.
Install the starter motor. Refer to Starter Motor Replacement (4.3L) or Starter Motor Replacement (4.8L, 5.3L, and 6.0L) or Starter Motor Replacement (8.1L) or Starter Motor Replacement (6.6L) .