Installation Procedure
- Install the window (3) to the door.
- Tighten the 2 retaining bolts (2) to the window assembly.
Tighten: Tighten the bolts to 12 N.m (9 lb ft).
- Install the window run channel bolt.
Tighten: Tighten the bolts to 9 N.m (80 lb in).
- Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
- Install the door trim panel. Refer to Front Side Door Trim Panel Replacement .
- Install the door switch panel. Refer to Door Lock and Side Window Switch Replacement - Driver Side and Door Lock and Side Window Switch Replacement - Passenger Side .
- Install the manual window handle, if equipped. Refer to Door Window Regulator Handle Replacement .
- Install the manual door lock lever.
- Install the trim panel upper extension. Refer to Upper Extension Trim Panel Replacement .
- Inspect the operation of the window.
NOTE:
Refer to FASTENER NOTICE
.