LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Silverado Classic 1500 HD, 4WD >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed & MOVEABLE Window Systems >> Repair Instructions >> Front Side Door Window Module Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Window Regulator Bolts
    GM348453Courtesy of GENERAL MOTORS CORP.
  1. Install the regulator to the door.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the bolts to the window regulator.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  3. Align the window to the regulator and install the bolts holding the window to the regulator.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  4. Connect the wiring harness to the window motor assembly.
  5. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  6. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .
  7. Lower the window. Inspect the window operation.
scientia non olet · About LEMON Manuals