LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Optra LT, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Wiring Systems And Power Management - Specifications And Ignition Switch Replacement >> Repair Instructions >> Ignition and Start Switch Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Ignition Switch Wiring And Retaining Screw
    GM1308230Courtesy of GENERAL MOTORS CORP.
  1. Remove the ignition switch lock cylinder. Refer to Ignition Lock Cylinder Replacement .
  2. Remove the ignition switch retaining screw.
  3. Disconnect the wiring and remove the ignition switch.
scientia non olet · About LEMON Manuals