LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Optra LS, Standard >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belts >> Repair Instructions >> Front Seat Belt Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Belt Retractor, Bracket And Bolts
    GM1308485Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the seat belt retractor with the bolt.

    Tighten:  Tighten the seat belt retractor bolt to 38 N.m (28 lb ft)  .

    2. Fig 2: View Of Upper Seat Belt Anchor Bolt
    GM1308484Courtesy of GENERAL MOTORS CORP.
  2. Install the seat belt retractor bracket with the screw.

    Tighten:  Tighten the seat belt bracket screw to 3 N.m (27 lb in)  .

  3. Install the upper center pillar seat belt anchor with the bolt.

    Tighten:  Tighten the seat belt anchor bolt to 38 N.m (28 lb ft)  .

  4. Install the seat belt anchor plastic cap.
    5. Fig 3: View Of Lower Seat Belt Anchor Bolt
    GM1308483Courtesy of GENERAL MOTORS CORP.
  5. Install the lower center pillar trim panel. Refer to Center Pillar Lower Trim Panel Replacement .
  6. Install the lower center pillar seat belt anchor with the bolt.

    Tighten:  Tighten the seat belt anchor bolt to 38 N.m (28 lb ft)  .

  7. Install the seat belt anchor plastic cap.
scientia non olet · About LEMON Manuals