LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Optra LS, Standard >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Specifications And Ignition Switch Replacement >> Repair Instructions >> Ignition and Start Switch Replacement >> Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice .
    Fig 1: View Of Ignition Switch Wiring And Retaining Screw
    GM1308230Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition switch with the ignition switch retaining screw.

    Tighten:  Tighten the ignition switch retaining screw to 2.5 N.m (22 lb in)  .

  2. Connect the wiring to the ignition switch.
  3. Install the ignition switch lock cylinder. Refer to Ignition Lock Cylinder Replacement .
scientia non olet · About LEMON Manuals