LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Malibu SS >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Shoulder Belt Guide Adjuster Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Seat Belt Adjuster Mounting Nuts And Cover
    GM1171371Courtesy of GENERAL MOTORS CORP.
  1. Install the seat belt adjuster to the vehicle.
  2. Install the upper garnish molding to the center pillar. Refer to Center Pillar Upper Garnish Molding Replacement .
    NOTE: Refer to Fastener Notice .
  3. Install the nuts to the seat belt adjuster.

    Tighten:  Tighten the nuts to 35 N.m (25 lb ft).

  4. Install the mounting nut cover to the seat belt adjuster.
scientia non olet · About LEMON Manuals