LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Malibu LTZ >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed & MOVEABLE Window Systems >> Repair Instructions >> Front Side Door Window Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Window Glass
    GM621645Courtesy of GENERAL MOTORS CORP.
  1. Position the window between the inner and the outer door panels.
  2. Point the lower front corner of the window down and pass through the belt opening.
  3. Align the edges with the window weatherstrip channel.
    4. Fig 2: Identifying Clevice Clamp Bolts
    GM621651Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  4. Turn the window to a horizontal position and align the window with the front and rear clevice clamps.

    Tighten:  Tighten the front and rear clevice clamps bolts (1) to 11 N.m (97 lb in).

  5. Install the window weatherstrip. Refer to Front Side Door Window Channel Replacement .
    6. IMPORTANT: Do not allow the sealing lips on the outer belt sealing strip to roll over and point downwards. If this condition is present the window will not raise properly.
  6. Install the outer belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Outer .
  7. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  8. Install the inner trim panel. Refer to Front Side Door Trim Panel Replacement .
scientia non olet · About LEMON Manuals