LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Malibu LTZ >> Repair and Diagnosis >> Body & Frame >> Windows >> Fixed & MOVEABLE Window Systems >> Repair Instructions >> Front Side Door Window Regulator Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Window Regulator - Front Door
    GM621584Courtesy of GENERAL MOTORS CORP.
  1. Install the front window regulator bolts half way into the rear window regulator motor and the rail.
  2. Position the front window regulator rail through the rear access hole first.
  3. Position the front window regulator motor through the rear access hole.
    4. NOTE: Refer to Fastener Notice .
  4. Install the front window regulator into the key slots. Attach the regulator to the motor and the rail. Secure the regulator with bolts.

    Tighten:  Tighten the bolts to 11N.m (97 lb in).

  5. Remove the tape and position the front window to the regulator carrier plate.
  6. Connect the window to the regulator carrier plate. Refer to Front Side Door Window Replacement .
  7. Connect the electrical connector to the front window regulator motor.
  8. Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
  9. Install the trim panel. Refer to Front Side Door Trim Panel Replacement .
scientia non olet · About LEMON Manuals