Installation Procedure
- Position the window channel into the front door.
- Install the front door window channel screws.
Tighten: Tighten the screw to 10 N.m (89 lb in).
- Install the window channel to the front door, starting in the top corner working out in both directions.
Firmly seat the window channel to the front door.
- Inspect the window for proper operation.
- Install the outer belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Outer .
- Install the outside door mirror. Refer to Mirror Replacement .
- Install the water deflector. Refer to Front Side Door Water Deflector Replacement .
- Install the trim panel. Refer to Front Side Door Trim Panel Replacement .
NOTE:
Refer to Fastener Notice
.