LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Malibu LS, 2.2 F >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System And Remote Functions >> Repair Instructions >> Remote Control Door Lock Receiver Replacement (Extended Sedan) >> Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Receiver From Vehicle
    GM1250548Courtesy of GENERAL MOTORS CORP.
  1. Install the receiver to the vehicle.
  2. Connect the electrical connectors to the receiver.
  3. Install the rear quarter lower trim panel. Refer to Rear Quarter Lower Trim Panel Replacement .
  4. The transmitter will need to be programmed after replacement. Refer to Control Module References for programming and setup information.