LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Wire Harness Assembly Replacement >> Installation Procedure

Installation Procedure

  1. Slide the bulkhead connector into the steering column.
    Fig 1: View Of Steering Column & Wire Harness Assembly
    GM603937Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Inflator Module Coil Caution in Cautions and Notices.
  2. Connect all of the connectors to the wire harness assembly.
  3. Install the upper and lower trim cover. Refer to Steering Column Trim Covers Replacement .
  4. Install the steering column into the vehicle. Refer to Steering Column Replacement .
  5. Install the steering wheel onto the steering column. Refer to Steering Wheel Replacement .
  6. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals