LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> Steering >> Steering Wheel & Steering Column >> Repair Instructions >> Steering Wheel Theft Deterrent Lock Replacement >> Installation Procedure

Installation Procedure

  1. Install the theft deterrent control module (2)onto the ignition lock cylinder case assembly (1).
    Fig 1: Locating Theft Deterrent Module & Ignition Lock Cylinder Case Assembly
    GM324869Courtesy of GENERAL MOTORS CORP.
  2. Connect the connector to the theft deterrent control module.
    CAUTION: Refer to SIR Inflator Module Coil Caution and Notices.
  3. If necessary, connect the connector to the ignition lock cylinder case.
  4. Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement .
  5. Install the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement .
  6. Enable the inflatable restraint steering wheel module. Refer to SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals