LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 978 (Engine Controls And Fuel - 3.5L - Repair Instructions) >> Repair Instructions >> Fuel Injection Fuel Rail Assembly Replacement >> Disassembly Procedure

Disassembly Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Injector Wiring Harness
    GM1797922Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the fuel injector wiring harness electrical connectors from the fuel injectors.
  2. Remove the fuel injector wiring harness retainers from the fuel rail.
  3. Remove the fuel injector wiring harness.
    4. Fig 2: Identifying Fuel Injector Components
    GM1797926Courtesy of GENERAL MOTORS CORP.
  4. Remove the fuel injector retainers (1).
  5. Remove the fuel injectors (3).
  6. Remove the fuel injector upper (2) and lower (4) O-ring seals.
scientia non olet · About LEMON Manuals