Instrument Panel Lamp Dimmer Switch Replacement
WARNING: This page is about a different car, the 2008 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the knee bolster panel. Refer to Driver Knee Bolster Panel Replacement . |
|
| 1 | Switch Housing Screw (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 2 N.m (18 lb in) |
| 2 | Switch Housing Bracket |
| 3 | Instrument Panel Dimmer Switch Procedure: Disconnect the electrical connection. |