Removal Procedure

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Adjustment Link To Lower Control Arm

Courtesy of GENERAL MOTORS CORP.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the nut from the adjustment link.

Fig 2: Identifying Outer Tie Rod Assembly And Steering Knuckle

Courtesy of GENERAL MOTORS CORP.

Use the J 24319-B to separate the adjustment link from the control arm.
Remove the exhaust. Refer to Exhaust System Replacement (RPO L26) or Exhaust System Replacement (RPO LD8) .
Remove the rear suspension support. Refer to Rear Support Replacement .

Fig 3: View Of Adjustment Link To Support Assembly

Courtesy of GENERAL MOTORS CORP.

Remove the cam lock nut and the bolt.
Remove the adjustment link from the support assembly.