LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 423 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Console Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Right Side .
  2. Remove the left console trim panel. Refer to Front Floor Console Side Trim Panel Replacement - Left Side .
    3. Fig 1: View Of Front Console Screws
    GM1207902Courtesy of GENERAL MOTORS CORP.
  3. Remove the front console screw covers from behind the console.
  4. Remove the front console screws.
    5. Fig 2: View Of Rear Console Bolts
    GM1207907Courtesy of GENERAL MOTORS CORP.
  5. Position the front seats to the full forward position.
  6. Remove the rear console bolts.
  7. Place the shifter in drive.
    8. Fig 3: View Of Pen Tray
    GM1207906Courtesy of GENERAL MOTORS CORP.
  8. Remove the pen tray.
    Fig 4: View Of Electrical Connectors And Console
    GM1207909Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not let the console contact the shifter handle or bezel.
  9. Disconnect the electrical connectors and remove the console.
scientia non olet · About LEMON Manuals