LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 417 (Exterior Trim) >> Repair Instructions >> Front License Plate Bracket Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Front License Plate Bracket And Bolts
    GM314802Courtesy of GENERAL MOTORS CORP.
  1. Install the front license plate bracket to the bumper.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the front license plate bracket retaining bolts to the bumper.

    Tighten:  Tighten the front license plate bracket retaining bolts to 3 N.m (27 lb in).

scientia non olet · About LEMON Manuals