LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 414 (Interior Trim And Paneling) >> Repair Instructions >> Assist Handle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Cover To Assist Handle Fasteners
GM1283408Courtesy of GENERAL MOTORS CORP.
NOTE: Refer to Fastener Notice .
  1. Position the assist handle into place and install the fasteners.

    Tighten:  Tighten the fasteners to 2.5 N.m (22 lb in).

  2. Install the cover over the fasteners.