LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2007 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 380 (Shift Interlock System) >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the knee bolster. Refer to Driver Knee Bolster Replacement .
  2. Remove the steering column trim covers.
    3. Fig 1: View Of Automatic Transmission Shift Lock Control Connector
    GM420205Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the automatic transmission shift lock control connector.
    4. Fig 2: View Of Automatic Transmission Shift Lock Control
    GM420208Courtesy of GENERAL MOTORS CORP.
  4. Use a screwdriver to pry the automatic transmission shift lock control from the steering column support assembly.
  5. Remove the automatic transmission shift lock control from the steering column.
scientia non olet · About LEMON Manuals